Read Error At Lba 0
Your computer should boot normally. All are XP PRO, WESTERN DIGITAL 40 gig hdd as singles(master). I tried changing every BIOS setting I could, no success.So I installed Kubuntu and restarted and turned the PC off and on over again to prove that the error is caused I can't install Windows 7 onto the HDD as Windows DVD gets stuck before the selection of the HDD partition for installation comes into play as well same is the case http://peakappcare.com/read-error/read-error-in-data-read-ansys.php
IT MUST be the program. The issue concerns only 1 tower of the 3. Sign in 6 Loading... I am not sure if this had anything to do with it.Any how, I see the steps here posted by Peter.
Read Error At Lba Testdisk
Use fixhdd -s
Use Ctrl+C to stop fixhdd.py. Auto Offline Data Collection: Disabled. my advice is replace the sata cable first bcause usually this error message might referring to our own hdd faults. Ddrescue Such drives can be detected normally but the data area is inaccessible with LBA detected as 0.
Top no_real_idea Post subject: Re: HDD Raw Copy Tool 1.02- read error occurred offset#; lbaPosted: January 24th, 2013, 11:49 Joined: January 22nd, 2013, 20:54Posts: 5Location: richmond Dear Vulcan, Hd Doctor For Seagate It gave me the following on running short test:: smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build) Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Join Date May 2010 Location uk Beans 9,374 DistroXubuntu 14.04 Trusty Tahr Re: Toshiba 500 GB HDD Input/Output Read Error Hi Run a SMART test on the drive from a LiveCD/USB Ask a new question Read More Windows Western Digital Data Recovery Storage Linux Related Resources How to restore .dd disk image file?
Ask ! Getdataback Self-test supported. After connecting the second drive, I suggest exchanging slave and master assignments then ghosting the original to the new master. until I turned the computer off or changed the Boot Disk priority in the BIOS (ie.
Hd Doctor For Seagate
so... I used active @ to image a 2.5" ide drive for an HP 6220, worked fine using a normal ribbon cable, and to speed up the process I decided to use Read Error At Lba Testdisk Short self-test routine recommended polling time: ( 2) minutes. Hdd Lba To repeat, Seagates are not worse than other drives because they appear to have raw read errors, rather they are the only one to report the number.
Please upload a file larger than 100x100 pixels We are experiencing some problems, please try again. weblink If the bridge card is bad, then it's possible WD could repair it for a reasonable cost but I can't be sure about that. How to and what to expect. 500GIG Western Digital USB storage. - Duration: 16:29. So the issue is Windows related. Hard Drive Lba
I am guessing it is the registry because it is being written to and for some reason the process does not complete. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always That includes very old images from 3 years ago that never had a problem. navigate here SCT Data Table supported.
the "A Disk Read Error Has Occurred ....." problem for me appears to definitely be file corruption. Seatools For Windows attributes list below are. What is "Read Error at LBA 448" in Nero, & How Can I Fix It?
I tried everything you tried (fixmbr, etc.). time put all the screws back into this little netbook.So I suggest to everyone, try moving the drive to a different SATA port (if available), reseat your drive cables, have the faithfulnathanSep 7, 2010, 6:24 AM Hi all,I fixed mine by going to the BIOS, BOOT settings, HARD DISK DRIVES, and switching the order of the drives around - ie. Crystaldiskinfo Rating is available when the video has been rented.
Replacing the data cable may fix it, but usually not.7. How "safe" would it be to continue to use this drive? Win7 Starter is worse than everything I had to face so far so I was trying everything to replace the 7 to the XP. his comment is here Auto Offline Data Collection: Disabled.
The rational behind this suggestion may be to attempt to "force" the drive to remap a sector which so far has only failed when read. (See the description in the table LBA is an acronym for Logical Block Addressing. recover files after full format and OS reinstall solved Recover My book live files solved how to recover my files from my buffalo hard drive... Code: dmesg | grep sda Output: Code: [ 3.826674] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.826755] sd 0:0:0:0: [sda] Write Protect is off [ 3.826763] sd
BEST TRICK - Duration: 7:46. It will work. There was lots of dust inside so i cleared that all out. That was it, so simple.
Well, that, and perhaps wave our hands wildly in the air for emphasis. And all of your data will still be accessible. but canceled it and decided I'd do it later at night (might or might not have anything to do with the problem). Next time I tried: disk error.
The script will check the log every five seconds and won't exit. DDoS: Why not block originating IP addresses? Did it provide any other information other than the recommendation to format the drive? I want to also mention that the error first appeared after I upgraded the 30gb PATA drive to a Western Digital 250gb PATA drive and re-imaged it.I also thought about trying
Could it be that the program file is corrupted in some way that only this ONE tower cannot deal with? Hopefully, no mechanical. You can easily destroy data if you aren't confident in what you are doing in TestDisk.